Removing the battery ... What's this all about?

[mrteach1973]

I was wondering if anyone had any tips for removing this wire from the positive side of the plastic surround around the Battery.

I can't seem to work it out. Is it the black bit actually on the plastic case I need to pry away 

See image below.

Many thanks

[Linas.P]

This is Battery temp sensor. It is quite standard clip, but pain to reach - there is little tang you need to press and then it comes off quite easily. Don't rip it off thought - might be expensive mistake.

[mrteach1973]

1 hour ago, Linas.P said:

This is battery temp sensor. It is quite standard clip, but pain to reach - there is little tang you need to press and then it comes off quite easily. Don't rip it off thought - might be expensive mistake.

Is it the bit that goes into the part attached to the actual case, rather than what looks like two wires coming together?

 

Thanks

[Linas.P]

The sensor plug is clipped into plastic Battery cover and removing it from the cover makes it easier to unplug. You still however need to unplug it... it is quite hard to explain but there is little plastic bit which you need to press for it to unplug. 

[Texas]

Need to depress the plastic tab exactly where the numbers are shown on it!

[mrteach1973]

19 minutes ago, Texas said:

Need to depress the plastic tab exactly where the numbers are shown on it!

Oooh! Ok. Will give it a go tomorrow. Exciting!