Hardwire dash cam with piggyback fuse

[RadicalCoupe-Fuji]

I have a nextbase dash cam, it comes with a fuse cable that plugs into a suitable fuse slot in a fusebox. In my old car I found a guide on the internet for where the fuse box was & which fuse to piggyback, either a constant power or power with the ignition on. I cant find anything on the RCF, anyone got advice for where the fuses are etc? 

[DavidCM]

I fitted one about a year ago to my RC.Thete was a very good you tube video about fitting a dash cam to an RCF try searching YouTube  with RCF and black Vue.

I'll see if I can find it for you as well

[DavidCM]

https://youtu.be/coL6th3nT0w

Try this .... I found it the most helpful and relevant.Be prepared to get into more positions than the Kama Sutra....

 

 

[RadicalCoupe-Fuji]

brilliant. thanks.

[DavidCM]

Just re read the post...the fusebox (in the RC)is in the passenger fóotwell,LHS when facing forward ..you 'll need to remove the glovebox and other bits of trim  see video.

[mr2lad]

58 minutes ago, DavidCM said:

Just re read the post...the fusebox (in the RC)is in the passenger fóotwell,LHS when facing forward ..you 'll need to remove the glovebox and other bits of trim  see video.

No you dont…. Bit of trim but NO REMOVING of the glovebox 🙈

@RadicalCoupe-Fuji ive hard wired my next base dash cam in on my RC F into the front passenger side footwell fuse box , I’ll get a pic of where to plug it all into tomorrow for you,