Lower control arms for ISF

[Fforfun]

Hi all, 

Looking at refreshing the LCAs on my ISF as a part of a general refresh and wondered what is recommended in terms of parts. I know the US guys generally go with Figs or RR racing, but are there any other options I should be considering? Full arms or just the bushings?

I'd be ideally looking at OEM or OEM+ in terms of hardness, as I'm not planning sticking the car on track and the country roads near me are fairly dire. 

Cheers

[4969_LXS]

GSF 0 offset bushes. I have them on mine, made a big difference over the old worn bushes. Make sure you get 0 offset ones

[Fforfun]

That's great, thank you. They are the ones shared with the RCF, is that correct? 

[4969_LXS]

I believe so. I'm going to recommend you specify GSF ones just because that's what I've got and I know they work. I can't speak for RCF ones

[Fforfun]

Many thanks for the help. 

[Fforfun]

On 12/1/2023 at 4:38 PM, 4969_LXS said:

I believe so. I'm going to recommend you specify GSF ones just because that's what I've got and I know they work. I can't speak for RCF ones

I've managed to get some on order from Japan (UK sellers wanted twice the price!) using the part references from Lexus Parts Direct. 

One more question: did you get an alignment done following installation? Seems some did and some didn't on the US forums. 

[4969_LXS]

I didn't get an alignment after they were installed. Steering was spot on and no inner tyre wear anymore

[Arqum]

What were the part numbers you used out of interest?

[4969_LXS]