Is200 Lowering

[lex2005]

Just had my car lowered, Put some h&r spring which lower by 30mm. The car looks to lowered and the rear wheels look indented. How can i resolve these isues is it the geometry,tracking. Any advice appreciated. thanks

[GALLA_4]

Just had my car lowered, Put some h&r spring which lower by 30mm. The car looks to lowered and the rear wheels look indented. How can i resolve these isues is it the geometry,tracking.  Any advice appreciated. thanks

←

Get some tried and tested springs as used by club members:

Eibachs

TTE's

Tein

[Colin P]

I think H&R are pretty good springs!

as for the car looking too lowered, well, you should have looked at that before you bought and fitted them. I believe it should be 35mm

indented, you mean the camber is off? as for geometry you should def. get that done after altering the suspension.

[Mr Morse]

Let the springs settle for a couple of hundred miles then have a FULL geometry check (Wheels-In-Motion on this site). You will see a huge improvement!

[Mr Singh]

H&R are very good springs, nothing wrong with them.

Used alot more in the US, and regarded as one of the options to lower more than eibach sets.... Which imo offers a lame drop :P

Go see Tony (wheels in motion) and i'm sure he'll make it drive like a dream :)

[MacRS200]

My IS2 is lowered 35mm on PI's and no problems with the Geo, rear camber is slightly out of spec (too much neg camber) but thats how you want it anyway :D

Like everyone has said let the springs settle and get a full geometry done either by the Dr or one of his approved places.

[lex2005]

ok, h&r are very good and used in r.ufs and porsche's. I think geometry shud sort it. I think they are 30mm drop.

[lex2005]

Who can do the geometry.

[Mr Morse]

Check the "approved" service providers on the Wheels In Motion website - none of them are particularly close to you though.

I had my geo done at TSL Motorsport near Nottingham - not sure if Dr Bones has them down as "approved" yet though.

[Tony-Bones]

First question. After the car was lowered did they re-set the geometry?

[lex2005]

No jus had it lowered a few days ago.

[Tony-Bones]

No jus had it lowered a few days ago.

←

Thats why the car looks "pants"....did you not know, or was you not told that the geometry will need to be recoverd.