I Want My Turnlights Always On

[eightysix]

Hi,

I want the us look on my turnlights, so that the turnlights are always on, but when you use them they go on and off. I tried to do it today with something a mate gave me, it was something i had to put between the turnlight cable, and connect with the standlight cable, then it should give the turnlight always a 6V power, and when you use it it goes from 6volt to 12 volts. Only problem was when i installed it, the turnlight didnt work anymore, and the side turnlight was always on at 6v and worked when you used it (went from 6volt to 12volts brightness)

i disconnected it and now everything is back as normal.

Can anyone help me out is there a way to do this?

here is an example of what i mean:

[Parthiban]

This might help:

Linky

[eightysix]

This might help:

Linky

looks ok but i want them always on in orange, and these shine white :(

[Mr Morse]

This might help:

Linky

looks ok but i want them always on in orange, and these shine white :(

Just follow the same instructions as the link, but use a dual filament 7443 amber bulb.

[eightysix]

This might help:

Linky

looks ok but i want them always on in orange, and these shine white :(

Just follow the same instructions as the link, but use a dual filament 7443 amber bulb.

Hi, i've looked at the instructions, but do i have to find the dual filament 7443 holders from a junk yard? because i think this is almost impossible to find here as almost no one drives lexus.

ps, have you received my pm about the foglights to sidelights?

[Mr Morse]

This might help:

Linky

looks ok but i want them always on in orange, and these shine white :(

Just follow the same instructions as the link, but use a dual filament 7443 amber bulb.

Hi, i've looked at the instructions, but do i have to find the dual filament 7443 holders from a junk yard? because i think this is almost impossible to find here as almost no one drives lexus.

ps, have you received my pm about the foglights to sidelights?

The dual filament bulb holders are a generic Toyota fitment...should be easy enough to find. You can also use the 1157 type bayonet type, doesn't matter...

No, haven't received your pm

[eightysix]

Is there no way to make the mod that the turnlights are always on (the same strenght as using them), but when you use them they do go completely on and off? (so not low strength and high strength)

I rather would have it that way :)

It looks like no one receives pm's from me