Im A Newbie, Would This Rims Fit With A Little Work Done?

[nissansilvia]

hi all had been reading the guide for offsets and width, was just wondering how much work is needing to be done to fit these, or wouldnt need any?

thank you very much!!!!

Blitz type 03

Front

18x9j +41 235/40/18

rear

18x10j +45 245/40/18

blitz type03 ebay

[sparkystav]

At that wide, prob quite a bit.

[nissansilvia]

At that wide, prob quite a bit.

right so is it like arch rolling and what is pulling fenders?

[muddyell]

Stav how wide can you go without havin to do work to fit them?

[Mr Mole]

Stav how wide can you go without havin to do work to fit them?

If you need your arches rolled then I would use a company called Arch Enemy thats who did mine and I'm running on 19"

[DJ Wozza]

I am running 8J ET45 225/40/18 on the front, and they only just miss the front upper control arm.

I am running 8.5J ET50 255/40/18 on the rear and had to have the arches cut slightly.

This is on a non lowered SE model that sits higher than the Sport.

I think the fronts won't fit because of the control arm, and the rears would need the arches pulling out quite a bit

(or even arch extentions of some sort) as the wheel will stick out past the arch.

Also if you check picture number 6 when you supersize, that wheel needs a new tyre :o

[Lexus2D]

;)

[nissansilvia]

thanks guys!!!

right i guess i will put it to peace than, ha as im running 17's 8jj and its rubbing the front arms, and its been dropped to the floor with hks coilovers.....

but does anyone have project thread on arch rolling and pulling pics?