Finally Modded The Car :d

[LOcKY]

Hi Peeps!

Finally got the TTE front bumper, brembo brake discs, BC RC coilovers and lowered by 20mm today :)) I'll try and get some pictures up, but its too dark now and the horrible snow means its staying on the driveway till the white crap disappears :)

I'll post pictures tomorrow when i can.

I like to thank breet (TTE front bumper fibreglass edition), Sheeldzy (BC Racing coilovers) and SINGH182 for the brembo brake discs :)

Colin

Pictures Coming to a screen near you!

Update! as promised here are the pictures :)

[stani1029]

sounds good mate, what colour is your car? im thinking of getting a TTE bumper but not sure if it will make a big difference to as how my car looks. get pics up asap! :)

[the_lone_rider]

Sound good, Never knew about a fibre glass eidtion TTE bumper, is that a replica then and how you rate it?

[LOcKY]

Yup its a replica, however the person i bought it off said it was a genuine so you could say i only found out when i took it to the body shop to be told it wasn't actually genuine :(( it looks good from the limited time i saw of it as it was really dark, but i was surprised how good it looks.

Also i was thinking of popping the Lexus badge back on, however the de-badged version looks kinda cool :P

Colin

[DaveEdin]

Well mine is staying debadged and looks like this:

Before changing the bumper:

After changing the bumper:

[F.A.]

DaveEdin - Wow, what a difference. Looks really good!

[DaveEdin]

Yep, that's what I thought when I saw it on the first time. It's a small change, but a massive difference if you see what I mean...

[t_boy]

That looks good, i probably would of changed the number plate size to a custom size jap one if youre into that sort of thing

[Rambo @ Lexus]

that looks really good,wanted to ask you for some advice on how to remove the front n back bumper without breaking any parts etc,,,,i want to change both front and back if you could give me some hints or advice would appriciate it mate

cheers

[ormi]

it was me that removed and fitted daves bumper. remove the clips and star screw from under the bonnet pull the splash guards back slightly you will find a 10mm bolt each side approx 5 10mm bolts under the bumper then pull it off if you have head light washers pull the pipe off on the n/s

rear bumper a few 10mm bolts and a few clips and pull it off...

[Rambo @ Lexus]

cheers mate,appriciate it,you know where the bolts and clips are for the rear bumper>?

[ormi]

you have to remove some of the boot trim...theirs 4 10mm nuts behind the boot trim..theirs poss 10mm bolt either side of the rear bumper plastic clip either side and two plastic clips at the rear..