Altezza Speedo Conversion Wiring Diagrams?

[Galee]

Hi I have just bought myself another RS200 Beams but this time Auto and I am getting it ready for the s.v.a. test. Just taken the speedo out to put the speedo chip on but the instructions that I have got with the chip are not the same colours as Stated. I have the following instructions:

Blue(from chip) >Top Row 1st from left red/yellow(connector end) SIGNAL

Yellow(from chip) > Top Row 1st from left red/yellow(loom end) SIGNAL

Red(from chip) > Bottom Row 4th from right green/black 12V

Green(from chip) > Bottom Row 2nd from left brown/black Ground

or

Blue(from chip) >Top Row 1st from left red/yellow(connector end) SIGNAL

Yellow(from chip) > Top Row 1st from left red/yellow(loom end) SIGNAL

Red(from chip) > Bottom Row 5th from right green/black 12V

Green(from chip) > Bottom Row 2nd from left brown/black Ground

On my loom there is no yellow/red and the other colours are not where they should be. Does anyone has alternative instructions?

Cheers

Galee

[SteveAudioX]

Fitted one Today.. Followed the bottom instructions posted...

It's a RED with Yellow line.. First PIN

Send a pic of your PLUG with colour cables. ( Bigger plug of the 2 )

[Galee]

Thanks L3X AV got it sorted now with some diffrent instructions.

Cheers

Galee

[imd7866]

[hi, im having the same problems, ive got a chip wihich as four wires

red - live

black

green

yellow

any help would be grateful,

which wire on the loom is the speedo wire?

thankyou in advance.