Navigator Pack Into Standard Is200 S

[paddsta]

Hi.

I have been offered a navigator pack for my Lexus IS200 (S Model).

It is from the same year vehicle (2000) as mine, and I was wondering will the necessary harnedd connections be there? also is it a massive job?

Has anyone attempted this before?

Here is a picture of the Navigator/ ECU as advertised...attached...

Many thanks in advance of any advice offered...

Cheers

Patrick

[DJ Wozza]

I think thats the one on E-Bay at the moment.

I believe the harness is only on the Navigator models, so that package is only

really of use to replace faulty components of an existing system.

[Vyker]

you will also need the centre console to house the mk1 remote control.

its not an easy job to retro fit, and i suspect that listing is just for spares.

good luck

[paddsta]

you will also need the centre console to house the mk1 remote control.

its not an easy job to retro fit, and i suspect that listing is just for spares.

good luck

Thanks guys...sounds like a heck of a lot of grief.

I read through the posts on Sat nav and saw a Tom Tom fitted...I think I will attempt to fit my tom tom on the coin tray, and hard wire it to a 12v supply on the back of the OEM Radio.

Cheers for you help...

[P.Lindblom]

you will also need the centre console to house the mk1 remote control.

its not an easy job to retro fit, and i suspect that listing is just for spares.

good luck

This is a much easier way to do it: http://www.lexusownersclub.co.uk/forum/ind...showtopic=48020

[Rob]

Hi.

I have been offered a navigator pack for my Lexus IS200 (S Model).

It is from the same year vehicle (2000) as mine, and I was wondering will the necessary harnedd connections be there? also is it a massive job?

Has anyone attempted this before?

Here is a picture of the Navigator/ ECU as advertised...attached...

Many thanks in advance of any advice offered...

Cheers

Patrick

that will not be of any use to you unless u already have the system fitted - you will need to make a loom or get another loom and as that one has been butchered you need to find another car with a loom and then strip 1/2 the car to fit it properly.

the standard lexus nav isnt that great either - a tomtom/garmin etc looks far nicer anyway

[bridgerippa]

does anyone kno if it possible to use the screen as an av output? for ps dvd etc etc?

[Geoffers]

Not easily. You need to convert any composite signel into RGB+Sync.

Its not worth it - it is cheaper to get another screen and fit it inside the housing. You'll probably end up with a better system with multiple inputs - you could even go for one with a built in digi tuner for less than £100