Gs300 Gen1 Clear Corners

[Rob-Halifax]

Anyone removed the amber from the indicators on one of these with a tutorial by any chance?

[TigerFish]

I didnt do a tutorial but I did de-tango mine

[Rob-Halifax]

Rick, easy? hard? tips?

[TigerFish]

A bit of a pain in all hoesty, but patience and persistance is the key. Once you start there is no going back though. I used a large screw driver through the bulb hole to break up the amber "cup" that is inside. Then long nose pliers to get the bits out. It is screwed on inside, so it take a decent amount fo effort to break it up. The only other way would be to either heat the unit up to melt the glue that holds the clear lense to the case to open it up, or use a dremel or simlar to cut the clear lense off. Then unscrew the amber cup from the case, and glue the lense back on. The way I did it, I guess if you were a gynecologist by trade, it would be a doddle.....

[Rob-Halifax]

rofl

My luck would dictate that if I did anything that required that level of working in tight places with tools, it would end up going through the lense.

Think i'll have to go with the heat gun and split the lense.

Luckily, I have an extra pair to practice on