Is300 Kits For The Is200

[Wrath]

Hi

I´m from Sweden and have just bought a is200 -00 and was looking at some tuning/styling for my baby , ive got a adress from this site ( http://www.lextasy.com/ ) but i couldnt find anything for the is200 !? does the is300 styling fit the is200 ? the cars look the same to me !

[Fidgits]

The US do not have an IS200, only the 300, and yes, the kit should fit your 200 fine.

Disclaimer: I aint no expert, so if you spend a fortune, don't blame me if it don't work!

[Fargo]

The US do not have an IS200, only the 300, and yes, the kit should fit your 200 fine.

Disclaimer: I aint no expert, so if you spend a fortune, don't blame me if it don't work!

beg to differ my good man..

i have recently taken delivery off an IS300 body kit (via lextasy), and although the front and rear skirts fit across the width perfect, its the the area that curves around the back towards the wheel arch that is the problem.

Apparently due to the US safety specs about low speed impacts and bumpers, the bumpers are approx an inch longer (or deeper depending on your point of view) so i have now got to cut an inch out and join it before getting sprayed.

Just another point Wrath, from my personal dealings with Lextasy.(see this thread). i would suggest that you go elsewhere for your body kit..either Takiara or contact a person who goes by the name of ADVANCE (free plug eh), he may be able to source and offer a better service than Lextasy..

[Fidgits]

hence my disclaimer.....

sorry to hear about the hassle Fargo... good luck with getting it sorted.

[Fargo]

is not a hassle, is a challenge..

[Fargo]

well my 2 pennies worth is fit them yourself,, they are worth the money as they look the dogs in the flesh,

they are easy to fit and there are guides on the forum.

[Fargo]

OOPS wrong post

:iraqi-info-minister:

[Fidgits]

post was for here?

[Fargo]

you got it :mat:

[Fidgits]

is not a hassle, is a challenge..

Well, I can't wait to see the finished project....

Will it be ready for JAE???

[Fargo]

maybe but probally not.

[Monster-Mat]

strange that you have to cut anything out......

the bumpers are deeper, but thats to cover the thicker US crash bars.

i have test fitted is300 (us spec) bumpers upto mine, and they were a perfect fit......just deeper

[Wrath]

:duh:

Sooo.. does the is300 bodykits and other stuff fit the is200 ? didn´t really understand all

(sorry for the bad english)

[Bazza-old]

strange that you have to cut anything out......

the bumpers are deeper, but thats to cover the thicker US crash bars.

i have test fitted is300 (us spec) bumpers upto mine, and they were a perfect fit......just deeper

not quite perfect if deeper ... surely

could you not fit the US crash bars ?

what the **** are the crash bars

something about 5mph crashes i think

what are ours 2.5mph?

[Fargo]

strange that you have to cut anything out......

the bumpers are deeper, but thats to cover the thicker US crash bars.

i have test fitted is300 (us spec) bumpers upto mine, and they were a perfect fit......just deeper

so if they are deeper then there is an overhang then, did you pull your forward to counter this