Do Not Sell My Personal Information Jump to content


clifton 94

Established Member
  • Posts

    397
  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Everything posted by clifton 94

  1. hi take it to a garage and get them to do a sniff check this will check if fumes are getting onto the cooling system if they are your head gasket is gone
  2. hi how much do you want for the black mats cheers tony
  3. if the engine is looked after these engines will easily cover 250.000 miles
  4. hi please give update when done as i need a set done cheers tony
  5. hi does the cigarette lighter work when pushed in
  6. hi if your rad is full then its could be your heater matrix blocked
  7. hi pull the siezed piston out and check the area between the dust seal and piston seal it rusts here and makes the piston stick
  8. hi if you just rest your foot on the pedal does the noise go
  9. hi if the matrix is blocked dont flush it as it never works replace it
  10. hi you should listen to ormi he does know his stuff
  11. hi have you checked the bulbs sometimes one will go and take the fuse as well this is the first thing to check
  12. h hi remove the pipe and blow it out with a high pressure airline
  13. Hi have a look on this forum and see how many have a gas conversion and alot have had problems with engine misfire it seems a hit and miss affair if you get a good conversion or not but at the end of the day its your choice just make sure you research your installer good luck
  14. hi one advice tip dont do it hope this helps
  15. hi did you take the spring right out if you did it could have fell out or it may still be in there the only way to check is to remove the spring and have a look in the hole be careful because if it is in there it may fall out this time
  16. hi sounds like you have taken out the detent spring there should be three parts the bolt spring and ball bearing or a plunger sometimes the ball bearing or plunger will stay in there if its in there just put the spring back in and tighten the bolt but check to make sure its in there hope this helps
  17. if the tapping stays the same as the engine revs drop theres a chance its mechanical you could take the injectors out and take them to a specialist and get them checked this will eliminate or confirm this is the problem
  18. if you rev the engine to say 4000 rpm then release the pedal does the tapping noise stay the same or does the tapping stop or get quieter as the revs start to drop
  19. hi if you keep running it it can only get worse and more expensive these cars good but they dont repair themselves you may save a lot of money if you get it checked sooner rather than later
  20. hi changing the oil will not make any difference the first thing to do is take the rocker cover of and check the state the cams are in also check valve clearance while your in there you could check your cam timing you need to do this first hope this helps
×
×
  • Create New...