Do Not Sell My Personal Information Jump to content


  • Join The Club

    Join the Lexus Owners Club and be part of the Community. It's FREE!

     

IS250 F-Sport Build Thread


dougie175
 Share

Recommended Posts

10 hours ago, rayaans said:

That looks factory fresh! Bet it'll look superb once its in and that logo looks great too.

Thanks yeah cant wait to get them installed alongside the new knob think they should compliment each other well

Link to comment
Share on other sites

7 hours ago, dougie175 said:

Thanks yeah cant wait to get them installed alongside the new knob think they should compliment each other well

Im particularly impressed with the logo though - it looks superb

  • Like 1
Link to comment
Share on other sites

5 minutes ago, rayaans said:

Im particularly impressed with the logo though - it looks superb

Thanks yeah I am hoping the logo is what really separates it from looking like something that hasn't come from factory like this.

Link to comment
Share on other sites

The dash piece turned up today and they look amazing, over the moon with them.

These are not great pictures as I have had very little time to fit them and the car is a right mess, but should give you an idea. Really happy with the finish. The logos look superb and the match to the genuine F-Sport gear knob is superb so all in all a great job.

Looks so much better than the strange metallic blue that Lexus originally used on the car, no idea why as the blue didn't match with anywhere else on the car.

Feels much sportier inside not, much less "Grandad"

597094ae7024f_2016-05-1219_01_39.jpg.d159df76a5fc2a1afa57c1088dead988.jpg

597094bc670f2_2016-05-1219_01_46.jpg.257583fe4c3c62d7a73a1065a9b3dc3e.jpg

597094c832e01_2016-05-1219_01_50.jpg.0b6a95ec9e382d0c5a30528bc0ce35a2.jpg

597094d5b5936_2016-05-1219_01_57.jpg.fe663945796ac58b15c22ea3eca0c1ab.jpg

597094e1951a2_2016-05-1219_02_12.jpg.93d58795fd8484de035f23222251757a.jpg

  • Like 4
Link to comment
Share on other sites

On ‎12‎/‎05‎/‎2016 at 8:22 PM, dougie175 said:

The dash piece turned up today and they look amazing, over the moon with them.

These are not great pictures as I have had very little time to fit them and the car is a right mess, but should give you an idea. Really happy with the finish. The logos look superb and the match to the genuine F-Sport gear knob is superb so all in all a great job.

Looks so much better than the strange metallic blue that Lexus originally used on the car, no idea why as the blue didn't match with anywhere else on the car.

Feels much sportier inside not, much less "Grandad"

597098256c836_2016-05-1219_01_39.jpg.85581e492294635ea248d4ad117b008f.jpg

597098336656e_2016-05-1219_01_46.jpg.64ee7ee82de5a6f17982b81981914d43.jpg

59709887937c1_2016-05-1219_01_50.jpg.78f6c6db316bfb34d875ec40bebbb501.jpg

597098994e92c_2016-05-1219_01_57.jpg.5a6a5b518ce8d20d282ecefdbc035ea7.jpg

597098a6019f9_2016-05-1219_02_12.jpg.e6d53bd1a0d39c219a89ace359b18f0b.jpg

Looks awesome! The best thing about it is that it looks like it came from the factory.

Whats next then?

The dashboard piece around the nav screen? :P I wonder if the black IS-F one would fit.......

  • Like 2
Link to comment
Share on other sites

Thanks yeah that was the idea everything I do on the car is supposed to look like it was done by Lexus themselves!

Next is: Mesiter R coilovers, small top spoiler and the big job is a smoothed Wald spoiler!

Yeah don't want to go too over the top with anymore carbon fibre in the cabin to be honest, a black stereo surround would work nicely though!

Link to comment
Share on other sites


12 hours ago, dougie175 said:

Feels much sportier inside not, much less "Grandad"

 

Lol, when I gave my daughters boyfriend a lift in my IS250 - he said 'it's a nice Dad car' so I know what you mean but your motor is something special now :)

 

  • Like 1
Link to comment
Share on other sites

18 minutes ago, bobmc said:

Lol, when I gave my daughters boyfriend a lift in my IS250 - he said 'it's a nice Dad car' so I know what you mean but your motor is something special now :)

 

Thank you!

Yeah they have an image about them, I can see why on some models but the IS F sport doesn't feel "Granddad" to be anyway! The older you get the better choice you make so cant be a bad thing being a granddad car!

Link to comment
Share on other sites

7 hours ago, jackcramerr said:

dougie

Get some real project now. Type to bolt a supercharger.

lol

I would love to have a supercharger on the car, but the more I read about supercharging the 250 the more it deters me from doing it. Basically I have come to accept the fact the best thing to do with this engine is leave it alone.

Will be concentrating of getting the interior and exterior exactly what I want before I even consider wasting a penny on the engine I think

Link to comment
Share on other sites


6 hours ago, jackcramerr said:

Will it throw engine codes? What stops you?

It will complement your car if it works out.

Engine issue potentially, hat stops me is the fact that the engine still currently cant be mapped in this country (think US mappers are getting there though) so makes it very difficult to actually get the car running correctly with a supercharger.

It would be lovely to have a good bit more power, especially coming from forced induction! But it will be a long way off if I do ever do go down the superchager route.

If a UK mapper cracks the ECU I would probably go ahead and do it, but as things stand currently its not a wise move I don't feel

Link to comment
Share on other sites

Bit more progress made this week

These arrived yesterday:

597098c801a31_2016-05-1807_54_14.jpg.087df08f3ad618c9cbb84d104c830f3f.jpg

597098d7c6bd8_2016-05-1807_55_34.thumb.jpg.783becbe11f0d0055e76601db6b30ee4.jpg

So this evening I managed to get the rears on, this is far from the final height or where I will have the suspension set, I will work that out once I have the fronts on and I have given them a few miles to settle in and then work out exactly what height I want that looks right, but will give you an idea

597098e941a87_2016-05-1820_43_55.jpg.19f4921d68fd0fc3defe25981e91b771.jpg

Random photo showing the arch gap, its pretty close but just seems to miss the quarter panel lip, which is nice saves me having to do any arch rolling and such which I wasn't looking forward too as I have never seen it done well enough without the need for filler and painting!

597098f993f97_2016-05-1820_44_04.jpg.e37f89fcf089bca68896196b8a0b8eaa.jpg

Some of you may have noticed in the picture above the addition of a rear upper glass spoiler, I'm still not 100% on this but I am thinking it will be complimented by the new smoothed wald spoiler that I am currently on with achieving on the tailgate, you may noticed I have removed the f-sport spoiler.

Basically once the new spoiler is smoothed in it will look like the images below, however this is a good 25-30 hour job to make a wald spoiler looks as nice as this as there is some serious work to stop it looking like it is just stuck ontop of the tailgate and make it look like it is 1 with the metal

This is what I am looking to achieve over the next few weeks, but it is literally hours and hours of work and rubbing

258509d1347827169-the-molded-wald-spoile

258510d1347827169-the-molded-wald-spoile

258511d1347827169-the-molded-wald-spoile

258512d1347827169-the-molded-wald-spoile

258514d1347827297-the-molded-wald-spoile

I think the upper spoiler will work perfectly with the smoothed wald spoiler!

Fingers crossed I may get time tomorrow evening to get the front coilovers in!

Link to comment
Share on other sites

Should look great when its done. The spoiler is something new - hats off to you!

Maybe its just me but the ride height does look a bit too low. Also have you got 3 people to sit in the back to ensure no rubbing?

  • Like 1
Link to comment
Share on other sites

You don't hang around, do you? :smile:

I think Rayaan might be on to something.  Entirely up to you of course, but perhaps a more uniform gap around the wheel?

The rear spoiler looks interesting.  Reminds me of what BMW did with the M3 CSL.

  • Like 1
Link to comment
Share on other sites

Bit more progress this evening, I managed to get the front coilovers in also, really impressed with the quality of the Meister R's they seem very good. What impresses me most about them though is that they are not bone shatteringly hard, which was something I was extremely keen to avoid on such a comfortable car as the IS250

Took a few pictures but please be aware this is not the final ride height (it will be somewhere around this after a bit of working out what looks best and avoiding any scraping), its basically as they came out the box with a bit of screwing up where required so they don't destroy my tyres.

The final height will not be what a lot of people call "low" it will just be sporty with a nice shape around the wing to tyre, I think it looks silly once the wings start coming over the top of the tyres personally but its each to their own

597099339b050_2016-05-1919_06_08.jpg.d8e5317c1c151a321d87d9d22b553b40.jpg

5970994023969_2016-05-1919_06_21.jpg.9003bcd36de18a1e9214ca8a021082db.jpg

5970994bdc2f5_2016-05-1919_10_19.jpg.f6f449ce856fbc7303a53468feeeb5f7.jpg

59709959e94cd_2016-05-1919_17_19.jpg.dcd2c98d5fa8b7f75646ba23fd12fe7c.jpg

Link to comment
Share on other sites

And yeah thanks for the comments chaps just to re-iterate this is not the final ride height its too low for me personally I agree with you both I like a more uniform gap around the arch, once the springs do their settling in thing over the next week or so I will work out the exact final heights

  • Like 1
Link to comment
Share on other sites

On ‎18‎/‎05‎/‎2016 at 11:08 PM, rayaans said:

Should look great when its done. The spoiler is something new - hats off to you!

Maybe its just me but the ride height does look a bit too low. Also have you got 3 people to sit in the back to ensure no rubbing?

I sent the panels to him in the post. He then charged me £110 to do the work and return them too me.

Just bare in mind that the logos and such were produced separately that isn't something he can personally do, but he was happy to apply them and lacquer over them for me to make them sit under the top surface

Link to comment
Share on other sites

The smooth spoiler work has really begun now!

Spent about an hour on the spoiler last week and after 5 hours work today the spoiler shape was starting to look right and the thing has been bonded on and panel bonded around the edges.

I would say I sanded, cut and manipulated the spoiler for around 4 hours in total before even looking and bonding it on, this was to reduce the bulk of the spoiler and allow it to be smoothed in from the original lines or the car, hard work and I could have quite easily just stuck it on, smoothed it in and painted it all within a day but I would never have been happy unless it fell away nicely to the tailgate edges which it will do once I am finished.

59709ce79211a_2016-05-2113_19_17.jpg.0e30036ff56325d08dc64eecb3b2d5b7.jpg

59709cf755489_2016-05-2113_19_23.jpg.72883fea80b9dee306366da90b770766.jpg59709d0616f97_2016-05-2114_25_42.jpg.1763d49c5c528928fa1b10c98420a19b.jpg

 

59709d40c84e3_2016-05-2114_25_48.jpg.7036b89acfedee3c6aa4a026c7b2791c.jpg

59709d5053d0b_2016-05-2114_27_52.jpg.d63be1d392d0f959907e26691e8dd1b7.jpg

The photo above shows the extra work I have done to the lower area of the spoiler to give me enough room to smooth it in to the lower tailgate without sticking out and looking bulky like it is sat on top of the tailgate

59709d5f5e797_2016-05-2114_27_58.jpg.d171bc1a31b08eef3f30f1975a61b0d5.jpg

Its difficult to show but from this angle you can see there isn't going to be too much fiberglass and filler required to smooth the spoiler in, seeing what some of the guys have done in the US their body shops have added ridiculous volumes of fiberglass to smooth the thick edge the spoiler would usually come with into the boot lid. You may also get an idea in this photo just how much the actual shape of the spoiler has been changed from what you receive in the box

The car is now back home and I am about to go and make the area water tight to ensure no rust starts on the bare metal areas

Next I need to sand the panel bond down, not much but just knock off the roughness and high spots., remove all the paint on the rest of the boot lid and begin fibre filling the spoiler into the boot lid.

Once I am happy and the shape matches the car nicely I will fill over the fibreglass to give a smooth finish, and then I will probably spray fill the entire area also to loose any ripples and lines, then I will finally have something after lots and lots of sanding which will be ready for primer, another rub and paint!

A another 20 hours or so of work and I should be done!

Link to comment
Share on other sites

Just stuck some gaffer tape around the spoiler as the panel bond is now pretty much hard and dry to protect the bare metal from the elements until I get chance to sand and prep the rest of the tailgate.

With the tape on it actually give you a much better idea of how it will look so thought I would take a couple more photos

59709d866e934_2016-05-2118_19_02.jpg.1ee6fc8d6ff5a5ee02b563c212ee2425.jpg

59709d95db1fa_2016-05-2118_19_06.jpg.fa5685e2e523479127d93c530ff7b60c.jpg

59709da290411_2016-05-2118_19_13.jpg.2d6445e60ad8bba8f66407c0641ca389.jpg

59709db1032a4_2016-05-2118_19_19.jpg.44b21b08ff48eb3c3e840e5b7f7fca15.jpg

Even if no one else likes this move I'm really happy with it and cant wait to get it finished

Link to comment
Share on other sites

Latest Deals

Lexus Official Store for genuine Lexus parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







Lexus Owners Club Powered by Invision Community


eBay Disclosure: As the club is an eBay Partner, the club may earn commision if you make a purchase via the clubs eBay links.

DISCLAIMER: Lexusownersclub.co.uk is an independent Lexus forum for owners of Lexus vehicles. The club is not part of Lexus UK nor affiliated with or endorsed by Lexus UK in any way. The material contained in the forums is submitted by the general public and is NOT endorsed by Lexus Owners Club, ACI LTD, Lexus UK or Toyota Motor Corporation. The official Lexus website can be found at http://www.lexus.co.uk
×
  • Create New...