Do Not Sell My Personal Information Jump to content


  • Join The Club

    Join the Lexus Owners Club and be part of the Community. It's FREE!

     

Navigator Pack Into Standard Is200 S


Recommended Posts

Hi.

I have been offered a navigator pack for my Lexus IS200 (S Model).

It is from the same year vehicle (2000) as mine, and I was wondering will the necessary harnedd connections be there? also is it a massive job?

Has anyone attempted this before?

Here is a picture of the Navigator/ ECU as advertised...attached...

Many thanks in advance of any advice offered...

Cheers

Patrick

post-21303-1202997677.jpg

Link to comment
Share on other sites

you will also need the centre console to house the mk1 remote control.

its not an easy job to retro fit, and i suspect that listing is just for spares.

good luck

Link to comment
Share on other sites

you will also need the centre console to house the mk1 remote control.

its not an easy job to retro fit, and i suspect that listing is just for spares.

good luck

Thanks guys...sounds like a heck of a lot of grief.

I read through the posts on Sat nav and saw a Tom Tom fitted...I think I will attempt to fit my tom tom on the coin tray, and hard wire it to a 12v supply on the back of the OEM Radio.

Cheers for you help...

Link to comment
Share on other sites

you will also need the centre console to house the mk1 remote control.

its not an easy job to retro fit, and i suspect that listing is just for spares.

good luck

This is a much easier way to do it: http://www.lexusownersclub.co.uk/forum/ind...showtopic=48020

p2130027lu9.jpg

Link to comment
Share on other sites

Hi.

I have been offered a navigator pack for my Lexus IS200 (S Model).

It is from the same year vehicle (2000) as mine, and I was wondering will the necessary harnedd connections be there? also is it a massive job?

Has anyone attempted this before?

Here is a picture of the Navigator/ ECU as advertised...attached...

Many thanks in advance of any advice offered...

Cheers

Patrick

that will not be of any use to you unless u already have the system fitted - you will need to make a loom or get another loom and as that one has been butchered you need to find another car with a loom and then strip 1/2 the car to fit it properly.

the standard lexus nav isnt that great either - a tomtom/garmin etc looks far nicer anyway

Link to comment
Share on other sites


Not easily. You need to convert any composite signel into RGB+Sync.

Its not worth it - it is cheaper to get another screen and fit it inside the housing. You'll probably end up with a better system with multiple inputs - you could even go for one with a built in digi tuner for less than £100

Link to comment
Share on other sites

Latest Deals

Lexus Official Store for genuine Lexus parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






Lexus Owners Club Powered by Invision Community


eBay Disclosure: As the club is an eBay Partner, the club may earn commision if you make a purchase via the clubs eBay links.

DISCLAIMER: Lexusownersclub.co.uk is an independent Lexus forum for owners of Lexus vehicles. The club is not part of Lexus UK nor affiliated with or endorsed by Lexus UK in any way. The material contained in the forums is submitted by the general public and is NOT endorsed by Lexus Owners Club, ACI LTD, Lexus UK or Toyota Motor Corporation. The official Lexus website can be found at http://www.lexus.co.uk
×
  • Create New...