My Front End........

[Noel]

Maybe he was only trying to rescue your bumper ... :P

[davey_is200]

mate your ruining a nice type of car with the chav spoiler and front end , if you want a scooby back end by a scooby , if you want a evo style front end by a evo and by your name go back to chavy corsa's instead.

corsavandal = more like lexus vandal

[boddamloon]

that was a bit strong???

[Unregistered_User]

Hey there fella,

Can't believe that thieving little perisher tried nicking off with the bumper. I'd have wanted to do some lovely damage to the little stinker.

J

Edited August 6, 2007 by janey
naughty words

[Tuff]

the one thing with these little robbing ***** if it aint pinned down, their havin it. glad you got your bumper back :)

[Tuff]

hey corsavandal you thought you had the biggest spoiler check this out

[boddamloon]

As he squeeeeeezes into drive !!!!

[LexusIS200Sam]

i wouldnt worry, you would of probley been offered a lexus bumper down the local pub by some chav... supprisingly the same colour for £10 or a few drags on a cigarette ;)

[Rory]

I wouldn't have stopped to ask what he was doin with it either, i'd have given him what for before he knew I was there, thievin little ****,

Edited August 6, 2007 by janey
profanity filter evasion

[corsavandal]

Beating kids up doesnt really float my boat, and id have probably had a knock on the door an hour later and it would have been his thieving old man or at the other extreme the police because the kids parents are doing me for assault.

Honeycombe bit needs to be cut out but it's easy with a jigsaw and doing it from the back there's a lip that goes round you can use as a guide.

Davey appreciate your opinion, but im going to chose to ignor it and as for the Lexusvandal crack, i think Rik has already cracked it :P

The vent is now done, used the coroded drivers side fog housing, meshed the front and ran some alluminium ducting fron the hole at the back up to a hole drilled where Aaron said last night.

Pic's will follow just waiting for a break in the rain to take some.

[P38Aaron]

hey corsavandal you thought you had the biggest spoiler check this out

Have just ordered one to mount on my roof

Rain?!?

[corsavandal]

mount on the roof? it is a roof in its own right!

went crappy about an hour ago, nothing like we had a couple of weeks ago, just light stuff. but rain all the same.

[Rikos]

mate your ruining a nice type of car with the chav spoiler and front end , if you want a scooby back end by a scooby , if you want a evo style front end by a evo and by your name go back to chavy corsa's instead.

corsavandal = more like lexus vandal

That was a bit strong but as CV said i've already cracked the LV joke

I have alot of respect for CV as he's done something different and not only that he's taken all the stick and negative comments that everyone's thrown at him.

Luv Lucy :P

[corsavandal]

I hope you're not falling for me Lucy, you're not my type

Lower mesh is now in and the first bit of filling of the number plate void is done. Having a bite to eat having nailed everything down (just incase there's any sticky fingers walking past), then its out to do the last skim before sanding.

[DJ Wozza]

methinks it was a bit strong Dave. (lexusvandal)

It is his car to do with what he likes.

Our opinions on the Scooby/Evo/IS200 Project are just that..

our opinions

[Rikos]

I hope you're not falling for me Lucy, you're not my type

Lower mesh is now in and the first bit of filling of the number plate void is done. Having a bite to eat having nailed everything down (just incase there's any sticky fingers walking past), then its out to do the last skim before sanding.

I'm sorry i'm spoken for

Make sure you crack on and get it finished for tomorrow!

[aztecbandit1]

get some pics up of the front fog matey just want to see if it looks like mine with the mesh on... :P

[corsavandal]

get some pics up of the front fog matey just want to see if it looks like mine with the mesh on... :P

not as good, its my first attempt at meshing so i'd put it at average at best. mums gone away with the camera, and ive lost the drivers for my phone so cant get them of it onto the computer that way either.

Rik, im trying but found out tonight footy's on at 5! if i came down id have to set off back straight away to be back for kick off.

[Niraj]

Drivers side fog will be the intake for ducting upto filter (like Aaron's)

Passenger side fog will be covered by a square number plate and where the number plate is at present will be filled and flushed.

I already have a sports grill which i'll be debadging, and the honeycombe stuff beneath it will be replace by new black mesh.

What do you think??

Still havent grasped the imaged posting on here!

:o That's MY front end (after editting)!!! LOL ;) thought i recognised the pic

[Unregistered_User]

Uh oh..... copyright lol :D

[Rikos]

get some pics up of the front fog matey just want to see if it looks like mine with the mesh on... :P

not as good, its my first attempt at meshing so i'd put it at average at best. mums gone away with the camera, and ive lost the drivers for my phone so cant get them of it onto the computer that way either.

Rik, im trying but found out tonight footy's on at 5! if i came down id have to set off back straight away to be back for kick off.

What footie?? Do you mean the community shield?

Can always stay and watch it at a local pub!!

[Brettster]

C'mon, Where are these pics then?

[P38Aaron]

you got any pics yet???

[aztecbandit1]

AS above ^^^^^ :D