Do Not Sell My Personal Information Jump to content


Leaderboard

Popular Content

Showing content with the highest reputation on 08/27/2022 in all areas

  1. After a slight delay due to the V5 being the only thing I forgot to change my address on when I moved not too long ago, picked mine up today. Immediately impressed as the 42 mile drive back was all on EV, with music and navigation via wireless AA, and A/C on a quarter of the way until it asked me if I wanted to close the window... Definitely more fun to drive than the RX and loving no body roll and general bounce. 450h+ F Sport with side steps and protection pack, Azure blue and red flare is the obvious bit!
    5 points
  2. Further update. After spending what felt like hours on the phone. I CAN keep existing finance in my name, and remain the registered keeper. My Insurers WILL insure the car in my name, even though I cannot currently drive for medical reasons, and Wife can remain as a named driver so she can drive it. So I think all is sorted now. Next step is appealing the decision to not allow me to drive. That will be interesting.
    4 points
  3. The bank details you give them are exactly what appear on your Cheques if you have ever written a cheque you have given the person your bank details that's all they need
    3 points
  4. In theory you only need a single cat in the car, so yes you can remove upper-cats and join pipes into single cat. I assume you want this as it would make easier to do pipe management considering you will have single turbo with single outlet. However, you can't use the standard IS250 cat because it is designed to be used in pair and for relatively low flow (as there are 4 of them to handle everything). So first of all with single cat it would not pass MOT due to emissions, secondly you will burn that single cat, tertiary it will not flow. So what you need is to put single large high flow ("performance") cat in place of one of secondary cats. But if you planning to use it on the track, then why bother with cats? Just straight pipe-it from beginning to the end. Regarding the second point - this forum does not hate mods. Lexus and IS250 in particular hates mods. Have you seen the engine bay? It is so tight you lose your knuckles just looking at it, working on it is painful and where exactly you planning to fit the turbo? Heat management will be bi*** as well, as you starting to realise you exhaust solution will be difficult as well. And that is just beginning of the issues. 4GR-FSE as most of modern engine have low friction rings, they can't handle forced induction (it will blow by and you just going to cook it), so you will need at very least rebuild the engine and add new rings... which you will have to adapt from some other car, because to surprise of nobody there are no aftermarket parts for 4GR-FSE. Now you have your engine rebuilt at the cost of say £1000 (if you do it yourself). Next step actually fitting the turbo and all the fabrication, add another £1000 (if you do it yourself). Once that is done you need standalone ECU, only the part itself is £1500 to handle DI and 6 cylinders and few more nice things like wideband etc. then you will need to tune it. Can you do it yourself? Else it will be another £1000 considering the hire of dyno etc. And here is the key point why these things are not being done to IS250 (and it is not that people here hate mods) - after spending £4500 you may have 300hp if you lucky, but likely unreliable, not road legal and uninsurable car. Even swapping the engine will be cheaper and more beneficial than turboing 4GR-FSE. So add the price of your project car and suddenly you can just buy another 100 different car for similar price and with more power and more suitable for the track use. I mean sure, you can just bolt on some old diesel turbo, put scaffolding around it and just wing it - but that will be less of "scientific research" and more of bonfire, you won't make any power at all without ECU and blow the engine before you can even get to the track. And that is before we even consider all other mods which you may want to do before taking IS250 on track. Answer - just get something else. And this is not because I am trying to save IS250 from being "modified", but because it does not make economical sense for you. Just as example of car which will cost less than your mods and will be better for track in itself: https://www.ebay.co.uk/itm/195294356803 or https://www.ebay.co.uk/itm/265821350422
    3 points
  5. I have only ever put shell V power, momentum 99 in the three lexus that I have owned and will continue to do so regardless,call me whatever 😉
    3 points
  6. Worms, can, opened It's all snake oil. Super-duper petrol in a super-duper engine that's been tuned to use it - great, makes sense. Super-duper petrol in a standard engine makes no sense whatsoever.
    3 points
  7. Indeed. I would too!
    2 points
  8. As far as my experience all you need for bank transfer is account name, account number and sort code.
    2 points
  9. And just dropped the car off. Took about half an hour, price offered online was honoured (and that was based on their highest condition category) and money was in my bank literally as I walked out the door. All in all, very impressed.
    2 points
  10. Found it on the SC430mods forum on Facebook. A written guide with pictures on how to install the camera thanks to Mark Dressel. Here’s the link https://www.facebook.com/groups/5768778186473135/permalink/8210156749001921/
    2 points
  11. Here a link to the installation video I thought someone also did a guide to installing it on the SC430 UK Facebook Forum but I can’t find it now. That’s the trouble with Forums on Facebook you can never find anything afterwards.
    2 points
  12. I'm not so sure I am a fan of the watered down stuff. But if I get the same mileage and there is no noticeable difference in mpg or performance then why throw the government more money?
    2 points
  13. Each to their own. Sometimes I do and sometimes I don't. But as to 'difference', difference in what... mpg, smoothness, cleanness, emissions etc? Best to do what you want but I don't think anyone truly knows or knows whether it's worth the extra cost?
    2 points
  14. In the absence of independent directly comparable tests over a good distance, the difference could be subjective. Looked at another way, the higher octane or E5 contains less of the dreaded Ethanol which is a problem with some cars and produces less power when added. In other words, the normal unleaded has now been further adulterated. I was under the impression that the super grade, contained additional additive(s) to help clean engine and maximise performance. The difference could vary with the type of vehicle. Some high Octane fuel contains 5% Ethanol while some is Ethanol free. Let's hire a track for a day and do various tests!
    2 points
  15. This is a good thread to take a look at:
    2 points
  16. I had previously found iron filings on the tops of both rear ABS sensors. Today I took the sensors out and found more filings on the tips of the sensors. I picked them off, then cleaned the tips with contact cleaner spray. I used a round magnetic tool inside the sensor holes to clear the remaining debris. The reluctor ring castellations are less than 1 mm deep, so I don't think they will be sending much of a signal to the sensors. I put everything back together and a test drive showed the problem still there. I did not want the hassle of fitting new reluctor rings, so I ordered 2 new driveshafts from Rockauto. They come with new rings and dust covers, and I will also get the benefit of new rubber boots and bearings. They are due to arrive next month. I will post the outcome in due course.
    2 points
  17. The thought " It seemed like a good idea at the time" comes to mind. Firstly, body lift. Secondly, getting the hump. Thirdly, my wheels and spoiler is bigger than yours. I found these while looking at SC430 images on line and after initially feeling nauseous I thought it only fair to share them! Anthony
    1 point
  18. Yup, traded in my 2019 RC300h for a 2020 RX450h, fewer miles and many more toys!!
    1 point
  19. Hi MrT. Look on the American Lexus forum. A few years ago someone fitted twin turbos to their is250. From memory the turbos were located at the rear of the car and the forced air back to the front. It was a very intense build which took quite some months and various trips to specialists. The car ran very well and he sold it about a year later. I think I found the article c/o googling turbo is250. If you've got it in your head to do it then best of luck. Don't be put off by it or by anyone. Do find that article as it's a ruddy good one.
    1 point
  20. Why should they ask for that Simon ?
    1 point
  21. Apologies for the vague initial post, was done on phone rather than the PC which makes link hard work. The unit is sold from the UK as an ICEBOX product but does look like the rather generic ones as seen elsewhere. One thing I will say about this one in particular is that ICEBOX customer service is UK based and they will reply to emails/phone calls same day. I've personally found the aftersales really good, it was the difference between it being a risky purchase and a no-brainer for me. I emailed Icebox to discuss compatibility with the RCF and wanted to make sure of the below points Picture would fill the full screen and resolution would be good. Touchpad would work fine. I'd retain use of the OEM multimedia if I ever needed it. Can I use it with USB rather than wirelessly as described. Steering wheel controls etc. would be fine. After answering all of these questions satisfactorily they sent to a link to a unit that I need, please see below. (note it says NX rather than RC, think its because I have updated RCF multimedia) https://www.iceboxauto.com/lexus-rc-series-2015-19-wireless-apple-carplay-wired-android-auto-siri-rear-camera Initially the unit arrived without instructions though a quick email got this sorted. After having read this it all made sense. Stripdown of the dash is simple enough and there are plenty of other guides on how to do this so not going to cover it. I initially test ran everything with the dash in bits but once satisfied that the hardware was all ok, rebuilt and started configuring the unit to operate everything as required. Seems a lot of these boxes are rather generic and get a flash to become compatible with different cars. Once the machine is able to work on a car, final configuration is done in the menus once fitted. Please see a few points. I wouldn't bother with wireless, found it hard work and because I wanted to charge my phone from USB I think this was just confusing the unit. When you initially connect the iPhone you will be asked if you want to use the unit in USB or wireless mode. Select USB and reliable quality/connections will be easy. Select steering wheel controls to 'Invalid'. Initially my track up button on the wheel would change source. Ensure that on the iPhone the option to allow 3rd party USB connections to access details whilst screen in locked in enabled. This setting is configured in the phone on a device by device basis so won't create any security issues. Run the MMI USB socket inside the transmission tunnel and drill a 10mm hole in the arm rest cubby hole to run a quality lightning cable. Cable tie the plug/socket together under the trim so you don't have issues with them coming separated throughout normal use. I'm more than willing to answer any further questions on it, please let me know if you want a run through or more details. Marcus
    1 point
  22. Sort Code Account Name Account Number is all they need. They are merely given an access to pay into your account Vas. Nothing else.
    1 point
  23. Just one of the last ones registered (before the 2 ‘19 plate cars) at ab extraordinary price. Which Dealer is it at?
    1 point
  24. Looks great! Happy motoring!
    1 point
  25. Nice! Enjoy! I'd love to see some interior photos if you don't mind doing that.
    1 point
  26. I had a similar experience selling to Cazoo as well, I selected highest condition category (car was 13-years old), price quote paid without any quibbles.
    1 point
  27. Not sure if they show on the map, but you should get a beep-beep alert as you approach one.
    1 point
  28. 1 point
  29. I know Paul.Was just joking with you.
    1 point
  30. The Relentless Pursuit is a book by Alexander Kent, old Buddy. Have another go !🤣🤣
    1 point
  31. Build now in progress 🙌
    1 point
  32. I think Barry has given an excellent posting. PSA testing has never been a serious diagnostic marker for prostate cancer. However, whilst the only current diagnostic is a prostate biopsy (ouch!!). There is some good work being done on less painful diagnostics, so hopefully you will last until then! By the way if you do want a PSA test they are readily available in the NHS by asking your GP. Back to VSC Lights - I have tried all the laymen or should it be laypersons? Methods of extinguishing this light. Interesting I note that the location of the jumper is different on different posts. Can anybody that has successfully extinguished the light let me know what terminals you used - all I managed was to change the language on my GPS to Japanese!!!
    1 point
  33. I suspect we lucky people in the UK are much better off than most in the world .......... Malc
    1 point
  34. Well while I have been alive we have had 50% Labour leadership and 50% Tory leadership, and most analysts seems to be saying for last 50 years we have been under-investing in infrastructure. So we have poorer railways, poorer roads, poorer sewers, not far off breaking point electric supply, and lack of investment in gas storage. So we can expect broken suspensions (as I have had with my LS), less electric for your EV, and to be enjoying smelly water for some time to come. Welcome to Broken Britain (I was once in a Citroen C2 and hit a pothole at 20mph and it stalled the car and cut the electrics out for 3 minutes. Heaven knows what actually happened, I suspect my LS would have registered a complaint but not stopped for 3 minutes while it gathered its senses.)
    1 point
  35. Just curious on how ‘very broken’ this 250 is? I guess they never ran it dry of oil or you would not be thinking of engine mods. Bodywork?
    1 point
  36. Anthony, Herewith a couple of shots of the pack I received this morning (amazingly quick delivery!). I'm afraid there were no instructions with it and I hope the people I'm handing this over to can work out what goes where! I haven't tried to unravel all the cables and I've no idea what the black-banded box contains. The separate item is the camera in its fitting strip.
    1 point
  37. Thank you all. I am hoping... that when I sell it, someone who can use their own labour, will do it up and keep it on the road. Still looks lovely, but it does have issues, which makes it non-viable for me... 😞
    1 point
  38. Gave the UX a clean before the Ban starts. I finally got sorted on a pressure washer and foam lance. Happy with the set up. Got to say I do like that Bilt hamber you all recommended. By does it shift the muck. I've put the touchless on my birthday list and the touch on hydro wax. An old man eh simple to use no bending done in 10 mins. I also took your advice and got some RainX for the glass seems to be very good.
    1 point
  39. PCM sad to see that it's reached the end of the road. My 1996 Volvo 940 is needing a bit of welding this year to get it through the MOT. A rust hole around 40mm x 10mm on the offside rear jacking point. How about an Aygo or Yaris. Quite a good car. James.
    1 point
  40. Just had an app and email update saying car now built (5days) and in transit 😀
    1 point
  41. Thanks Ken for starting what has been a very interesting feed. As I am currently considerating the alternatives of this very upgrade I have followed it closely. I already have a reverse camera but need to know where and how to connect it into the sat nav screen. Let's hope you clever guys out there will explain to me and others who are interested in simple terms what needs to be done to achieve the desired result. Anthony
    1 point
  42. Yes, it is possible to reduce the volume level of the boot warning:
    1 point
  43. It opens so slowly that there is more chance of dying from old age than getting clonked by it.
    1 point
  44. My thanks to Anthony, Glyn and Neil for their helpful comments. I've bitten the bullet and ordered the reversing camera modification from SC430mods. The cost, including postage but not customs duties, was just shy of $200, which seems very reasonable. The kit is shown on their website together with a video of it in operation. Bromley Audio have agreed to install it for me when it arrives, which will be in about a week's time. I'm getting the work done by Bromley Audio because they'll be able to remove the kit that I don't like, knowing where everything went! They also do excellent work! I'll post an update when I've got it all done, together with pics.
    1 point
  45. A few days after picking up my car my son came over to have a look, leaning in the car he noticed scrtatches on the display panel above the aircon controls, taking a closer look myself I was dismayed to see there were indeed many deep scratches, they could only be seen from an angle with the light in a certain direction. Fortunately Lexus accepted my assurance that I hadn't as much as flicked a soft duster over the inside and replaced the unit. I did give the car what I thought to be a good look over on collection but just shows you can't be 100% sure. Worth checking yours. Bill D.
    1 point
  46. Interesting that in the exclusions section the multimedia screen and buttons are listed. Also springs appear in both the included and excluded sections? https://www.lexus.co.uk/content/dam/lexus/nmsc/united-kingdom/owners/warranty/extended-warranty-with-servicing/Lexus-Warranty-TCs-06-2022.pdf
    1 point
  47. Old story but high five for Toyota for the buy back offer
    1 point
  48. My mini schnauzer travels in the front anyone else in the back 😅. On YT there is an interesting video on the effectiveness of various harnesses in the event of an impact - worth a watch.
    1 point
  49. Just be careful. It's not that long ago since someone here had problems after adding 'upper cylinder lube' and admittedly, his problems may have arisen from the fact that he put too much in, but the point is, these engines are some of the most finely engineered machines you'll ever see and will happily run to 200k, even 300k miles and beyond, without any extra sort of additive or lubrication. If it ain't broke, don't fix it
    1 point
  50. I’m sure that getting comparable estimates would be interesting. I imagine that much of the prep work would be the same - apart from not needing to mask for a wrap. But surely after a respray what you end up with is a fresh coat of paint which is still as vulnerable to bird droppings, tree lime, stone chipping and so on, as it was before - but without the degree of self-healing that a wrap can provide. Perhaps an interesting question is if any manufacturer is ever going to offer a wrap fresh off the production line, as an optional extra?
    1 point
×
×
  • Create New...